Center for Composite Materials
ContactForumLaunch Workbench

CDS Chapter Library

Training & Exercise Manual
Contents

Each chapter has a permanent link, its own contents and a revision date. Read in sequence or go straight to the subject needed for your study.

← All manuals
MaterialsMicromechanicsLaminatesProcessingStructural responseResults + verification
  1. Workbench workflow01.01

    01.01 · Rule of mixtures: fibre volume fraction

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  2. Micromechanics01.02

    01.02 · Compare transverse micromechanics models

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  3. Micromechanics01.03

    01.03 · Short fibers: aspect ratio and shear-lag transfer

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  4. Workbench workflow01.04

    01.04 · Rule of mixtures · continuous fibers

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  5. Workbench workflow01.05

    01.05 · Halpin–Tsai · transverse stiffness

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  6. Micromechanics01.06

    01.06 · Short fibers · shear-lag transfer

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  7. Workbench workflow01.07

    01.07 · Hybrid fibers · orientation distribution

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  8. Workbench workflow01.08

    01.08 · NASA · T700/PR520 lamina analysis

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  9. Workbench workflow01.09

    01.09 · T700S / 180C Epoxy UD · stored-ply elasticity

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  10. Workbench workflow01.10

    01.10 · IM7 / Toughened Epoxy UD · stored-ply elasticity

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  11. Workbench workflow01.11

    01.11 · T800S / BMI UD · stored-ply elasticity

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  12. Workbench workflow01.12

    01.12 · AS4 / PEEK UD · stored-ply elasticity

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  13. Workbench workflow01.13

    01.13 · T300 / EPON 862 Epoxy UD Prepreg · stored-ply elasticity

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  14. Workbench workflow01.14

    01.14 · T800S / 977-3-Type Epoxy UD Prepreg · stored-ply elasticity

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  15. Workbench workflow01.15

    01.15 · AS4 / LY 1564-Type Epoxy UD Prepreg · stored-ply elasticity

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  16. Workbench workflow01.16

    01.16 · T300 / Phenolic Plain Weave · stored-ply elasticity

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  17. Micromechanics01.17

    01.17 · UD carbon / epoxy · Vf 45%

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  18. Micromechanics01.18

    01.18 · UD carbon / epoxy · Vf 65%

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  19. Micromechanics01.19

    01.19 · Balanced plain weave · screening

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  20. Micromechanics01.20

    01.20 · Warp-rich twill · screening

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  21. Micromechanics01.21

    01.21 · Triaxial braid ±30° · screening

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  22. Micromechanics01.22

    01.22 · Triaxial braid ±60° · screening

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  23. Micromechanics01.23

    01.23 · Short carbon / epoxy · L/d 25

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  24. Micromechanics01.24

    01.24 · Short carbon / epoxy · L/d 100

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  25. Micromechanics01.25

    01.25 · Glass particles / epoxy · Vf 10%

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  26. Micromechanics01.26

    01.26 · Glass particles / epoxy · Vf 25%

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  27. Micromechanics01.27

    01.27 · 3D-print feedstock · chopped carbon / PA6 · teaching

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  28. Micromechanics01.28

    01.28 · 3D-print feedstock · chopped glass / PET · teaching

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  29. Micromechanics01.29

    01.29 · Short fibers: alignment and stiffness

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  30. Micromechanics01.30

    01.30 · Micro: porosity sensitivity at fixed reinforcement

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  31. Micromechanics01.31

    01.31 · Micro: warp fraction and weave efficiency

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  32. Structural response02.01

    02.01 · FSDT plate bending: thin-to-thick comparison

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-03Read chapter ↗
  33. CREATE / DISCOVER02.02

    02.02 · Micro optimization: stiffness, voids and density

    INPUTVariables + bounds
    MODELDesign exploration
    OUTPUTCompared candidates
    Revised 2026-10-03Read chapter ↗
  34. Structural response02.03

    02.03 · FSDT cross-ply plate: buckling and natural frequencies

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-03Read chapter ↗
  35. CREATE / DISCOVER02.04

    02.04 · Laminate optimization: minimum mass under axial loading

    INPUTVariables + bounds
    MODELDesign exploration
    OUTPUTCompared candidates
    Revised 2026-10-03Read chapter ↗
  36. Structural response02.05

    02.05 · FSDT soft-core plate: shear-dominated bending

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-03Read chapter ↗
  37. CREATE / DISCOVER02.06

    02.06 · Process optimization: cycle time and thermal uniformity

    INPUTVariables + bounds
    MODELDesign exploration
    OUTPUTCompared candidates
    Revised 2026-10-05Read chapter ↗
  38. Workbench workflow02.07

    02.07 · Sandwich FSDT: clamped panel bending

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  39. Laminates02.08

    02.08 · Laminate orientation and tensile response

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  40. Workbench workflow02.09

    02.09 · ±45° coupon: in-plane shear

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  41. Workbench workflow02.10

    02.10 · Three-point bending: span and stiffness

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  42. Workbench workflow02.11

    02.11 · Thin-wall pressure vessel

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  43. Laminates02.12

    02.12 · Tensile coupon · laminate orientation

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  44. Workbench workflow02.13

    02.13 · Sandwich FSDT: biaxial compression buckling

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  45. Laminates02.14

    02.14 · ±45° laminate · in-plane shear

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  46. Workbench workflow02.15

    02.15 · Sandwich FSDT: directional-core natural frequencies

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  47. Micromechanics02.16

    02.16 · Stored lamina material · bypass Micro

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  48. Laminates02.17

    02.17 · Mixed stored/solved plies · unequal thickness

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  49. Workbench workflow02.18

    02.18 · Three-point bend · deflection

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  50. Structural response02.19

    02.19 · Cylinder · internal pressure

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-03Read chapter ↗
  51. Workbench workflow02.20

    02.20 · Lap joint · two adherends and adhesive

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  52. Workbench workflow02.21

    02.21 · Sandwich bend · skins, core and bond screening

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  53. Micromechanics02.22

    02.22 · Hybrid short fibers: orientation and volume balance

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  54. Laminates02.23

    02.23 · T700/Epoxy Quasi-Isotropic · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  55. CREATE / DISCOVER02.24

    02.24 · IM7/Toughened Epoxy Bending-Optimized · stored-data layup

    INPUTVariables + bounds
    MODELDesign exploration
    OUTPUTCompared candidates
    Revised 2026-10-03Read chapter ↗
  56. Laminates02.25

    02.25 · T800/BMI Balanced Cylinder · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  57. Laminates02.26

    02.26 · AS4/PEEK Quasi-Isotropic · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  58. Laminates02.27

    02.27 · T800/BMI Hoop-Dominant Cylinder · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  59. Laminates02.28

    02.28 · T700/Epoxy Cross-Ply · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  60. Laminates02.29

    02.29 · T700/Epoxy Balanced Angle-Ply · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  61. Laminates02.30

    02.30 · IM7/Toughened Epoxy Unidirectional · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  62. Laminates02.31

    02.31 · AS4/PEEK Cross-Ply · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  63. Laminates02.32

    02.32 · T300/Phenolic Woven Symmetric · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  64. Laminates02.33

    02.33 · T300/EPON 862 Quasi-Isotropic · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  65. Laminates02.34

    02.34 · T800/977-3 Quasi-Isotropic · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  66. Laminates02.35

    02.35 · AS4/LY 1564 Quasi-Isotropic · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  67. Laminates02.36

    02.36 · IM7/8552-Type Quasi-Isotropic · stored-data layup

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  68. Structural response02.37

    02.37 · Quasi-Isotropic Plate in Uniaxial Tension · resultant response

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-03Read chapter ↗
  69. Structural response02.38

    02.38 · Cross-Ply Plate under Pure Bending · resultant response

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-03Read chapter ↗
  70. Structural response02.39

    02.39 · Angle-Ply Plate under Biaxial Load and Shear · resultant response

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-03Read chapter ↗
  71. Laminates02.40

    02.40 · NASA · Balanced T700/epoxy tube laminate

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  72. CREATE / DISCOVER02.41

    02.41 · High-ply optimization: 48-ply axial mass study

    INPUTVariables + bounds
    MODELDesign exploration
    OUTPUTCompared candidates
    Revised 2026-10-03Read chapter ↗
  73. CREATE / DISCOVER02.42

    02.42 · High-ply optimization: 64-ply combined-load strength study

    INPUTVariables + bounds
    MODELDesign exploration
    OUTPUTCompared candidates
    Revised 2026-10-03Read chapter ↗
  74. Micromechanics02.43

    02.43 · Short fibers: alignment carried into laminate stiffness

    INPUTFibers + matrix
    MODELHomogenization
    OUTPUTEffective ply
    Revised 2026-10-03Read chapter ↗
  75. Processing03.01

    03.01 · Thermal cycle: surface-to-core lag

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  76. Processing03.02

    03.02 · Pultrusion: heating and cooling dies

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  77. Workbench workflow03.03

    03.03 · Pultrusion: multi-zone die and pulling speed

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-05Read chapter ↗
  78. Processing03.04

    03.04 · UV cure: exposure, penetration and exotherm

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  79. Moisture03.05

    03.05 · Moisture conditioning and diffusion

    INPUTExposure + sorption
    MODELMoisture transport
    OUTPUTConcentration history
    Revised 2026-10-05Read chapter ↗
  80. Workbench workflow03.06

    03.06 · Bonded joint: two adherends and adhesive

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  81. Structural response03.07

    03.07 · NASA · AS4/3501-6 pressure-cylinder screening

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-03Read chapter ↗
  82. Processing03.08

    03.08 · NASA · Thick T700S/TC380 cure process

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  83. Moisture03.09

    03.09 · Coupled cure, thermal, moisture and structural response

    INPUTExposure + sorption
    MODELMoisture transport
    OUTPUTConcentration history
    Revised 2026-10-05Read chapter ↗
  84. Processing03.10

    03.10 · Thermal cycle · surface/core lag

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  85. Moisture03.11

    03.11 · Moisture conditioning · diffusion

    INPUTExposure + sorption
    MODELMoisture transport
    OUTPUTConcentration history
    Revised 2026-10-05Read chapter ↗
  86. Workbench workflow03.12

    03.12 · Pultrusion · multi-zone die

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-05Read chapter ↗
  87. Processing03.13

    03.13 · UV cure · penetration and exotherm

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  88. Moisture03.14

    03.14 · Moisture expansion + structural load

    INPUTExposure + sorption
    MODELMoisture transport
    OUTPUTConcentration history
    Revised 2026-10-05Read chapter ↗
  89. Processing03.15

    03.15 · Mixed Micro recipes · cure + structural response

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  90. Moisture03.16

    03.16 · Cure + thermal + moisture + structural

    INPUTExposure + sorption
    MODELMoisture transport
    OUTPUTConcentration history
    Revised 2026-10-05Read chapter ↗
  91. Failure assessment03.17

    03.17 · Coupled ply damage + delamination growth

    INPUTStress + allowables
    MODELFailure criterion
    OUTPUTInitiation + limits
    Revised 2026-10-03Read chapter ↗
  92. Workbench workflow03.18

    03.18 · D6641 · Compression coupon

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  93. Workbench workflow03.19

    03.19 · D5379 / D7078 · Shear coupon

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  94. Workbench workflow03.20

    03.20 · D5528 · DCB opening

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  95. Workbench workflow03.21

    03.21 · D7905 · ENF sliding

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  96. Workbench workflow03.22

    03.22 · D6671 · Mixed-mode fracture envelope

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  97. Moisture03.23

    03.23 · D5229 · Moisture uptake calibration

    INPUTExposure + sorption
    MODELMoisture transport
    OUTPUTConcentration history
    Revised 2026-10-03Read chapter ↗
  98. Workbench workflow03.24

    03.24 · D5961 · Bearing / bypass screening

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  99. Workbench workflow03.25

    03.25 · D6484 · Open-hole compression

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  100. Workbench workflow03.26

    03.26 · D6742 · Filled-hole comparison

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  101. Workbench workflow03.27

    03.27 · D7136 / D7137 · Impact & CAI assessment

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  102. Workbench workflow03.28

    03.28 · Wiener series and parallel

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  103. Workbench workflow03.29

    03.29 · Looyenga / Landau–Lifshitz–Looyenga

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  104. Workbench workflow03.30

    03.30 · Maxwell–Garnett

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  105. Laminates03.31

    03.31 · Normal-incidence laminate TMM

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  106. Workbench workflow03.32

    03.32 · Bruggeman symmetric EMT

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  107. Workbench workflow03.33

    03.33 · EM Mori–Tanaka

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  108. Workbench workflow03.34

    03.34 · EM self-consistent

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  109. Workbench workflow03.35

    03.35 · Differential effective medium

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  110. Workbench workflow03.36

    03.36 · Coated sphere and interphase

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  111. Workbench workflow03.37

    03.37 · Generalized multiphase EMT

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  112. Laminates03.38

    03.38 · Oblique polarized laminate TMM

    INPUTPlies + angles
    MODELLaminate assembly
    OUTPUTStiffness + coupling
    Revised 2026-10-03Read chapter ↗
  113. Workbench workflow03.39

    03.39 · 1D transmission line matrix

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  114. Workbench workflow03.40

    03.40 · 1D Floquet–Bloch periodic layers

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  115. Workbench workflow03.41

    03.41 · Open-hole strength

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  116. Workbench workflow03.42

    03.42 · Creep & stress relaxation

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  117. Workbench workflow03.43

    03.43 · Analytical bonded joint

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  118. Failure assessment03.44

    03.44 · LaRC04 failure initiation

    INPUTStress + allowables
    MODELFailure criterion
    OUTPUTInitiation + limits
    Revised 2026-10-03Read chapter ↗
  119. Processing03.45

    03.45 · Tool-release shape

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-03Read chapter ↗
  120. Failure assessment03.46

    03.46 · Fatigue residual properties

    INPUTStress + allowables
    MODELFailure criterion
    OUTPUTInitiation + limits
    Revised 2026-10-03Read chapter ↗
  121. Structural response03.47

    03.47 · Cylinder buckling

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-03Read chapter ↗
  122. Workbench workflow03.48

    03.48 · Uncertainty & sensitivity

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-03Read chapter ↗
  123. Structural response03.49

    03.49 · Hot/wet plate: biaxial loading and environmental strain

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-05Read chapter ↗
  124. Processing03.50

    03.50 · Thermal warping: unsymmetric versus symmetric cross-ply

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  125. Moisture03.51

    03.51 · Moisture warping: conditioning an unsymmetric cross-ply

    INPUTExposure + sorption
    MODELMoisture transport
    OUTPUTConcentration history
    Revised 2026-10-05Read chapter ↗
  126. Processing03.52

    03.52 · Pultrusion: pulling speed, outlet cure and loaded stiffness

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  127. Processing03.53

    03.53 · UV cure: post-gel shrinkage and residual ply stresses

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  128. Processing03.54

    03.54 · UV cure: equal-energy one-sided versus two-sided exposure

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  129. Processing03.55

    03.55 · UV cure: does equal dose produce equal residual stress?

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  130. Processing03.56

    03.56 · UV cure: thickness, core conversion and locked-in stress

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  131. Structural response03.57

    03.57 · Pultrusion throughput: faster pulling versus structural response

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-05Read chapter ↗
  132. Processing03.58

    03.58 · Pultrusion: thick-section cure lag and loaded stiffness

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  133. Structural response03.59

    03.59 · Hot/wet angle-ply: shear loading and environmental coupling

    INPUTGeometry + loads
    MODELStructural model
    OUTPUTStress + deformation
    Revised 2026-10-05Read chapter ↗
  134. Processing03.60

    03.60 · Thermal bend–twist: reverse an unsymmetric angle-ply

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  135. Moisture03.61

    03.61 · Moisture plus applied bending: competing curvature contributions

    INPUTExposure + sorption
    MODELMoisture transport
    OUTPUTConcentration history
    Revised 2026-10-05Read chapter ↗
  136. Processing03.62

    03.62 · Thick laminate: reaction heating, cure gradient and process stress

    INPUTBoundary history
    MODELHeat + material state
    OUTPUTHistory + gradients
    Revised 2026-10-05Read chapter ↗
  137. Workbench workflow03.63

    03.63 · Oven cycle: gentle ramp and core-temperature lag

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-05Read chapter ↗
  138. Workbench workflow03.64

    03.64 · Oven cycle: two-stage dwell and exotherm

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-05Read chapter ↗
  139. Workbench workflow03.65

    03.65 · Oven cycle: unequal surface convection

    INPUTPrepare records
    MODELConnect + run
    OUTPUTReview the result
    Revised 2026-10-05Read chapter ↗
  140. Moisture00

    Balsa sandwich: seawater on one face

    INPUTExposure + sorption
    MODELMoisture transport
    OUTPUTConcentration history
    Revised 2026-10-05Read chapter ↗

Collected edition

The complete edition is dated 2026-10-03. Online chapter revisions may be newer. Full downloads require an active CDS license.

Complete PDF · Editable Word edition · First 20 pages preview